Best price HID headlight conversion kits,35w canbus ballast hid kits for golf for jetta for mazda for volkswagen for bmw
What is the Feature of Canbus Ballast HID Conversion Kit? ADT
Easy Conversion: HID headlight Conversion Kits is fast and simple to install, Just Plug And Play. Plug the HID bulbs in the old harness where a standard halogen bulb would go into, then connect the wires, secure the ballast and you are done, no cutting or welding. As easy as one two three!
More Light Output: A 35Watt HID light source produces up to 3 times the lumens as the light source compared to a 55W halogen bulb. Pure Sunlight: The color temperature of HID lightning is more closely linked to the color temperature of natural daylight. Halogen lights only appear "yellow".
Great Visibility: The combination of more light output and whiter color makes for much better visibility in most night time driving conditions.
Longer Life Time: HID lamps will last on the average of over 5 times longer than any halogen bulb. HID bulbs also produce less heat than halogen bulbs, so you do not have to worry about your headlight, fog light or harness melting.
2 x Xenon HID Bulbs ( Buyer chooses any Bulb type and Color Temperature)
2 x Ballasts ( with built-in starter/igniter for better performance)
2 x secure Mounting Brackets
Illustrated Installation Instructions
All necessary install accessories
What is the Main Technical Parameter of Canbus Ballast HID Conversion Kit? ADT
Input Voltage : Dc 8-18v
Starting up Instant Voltage : AC 23000V
Steady Power : 35W
Userful Life > 3000 Hours
Color tempture : 3000-12000k ETC
Packaging & Shipping
Packing: gift box packing or OEM packing Shipping: within 7 days
Skype: adtsales009 adtsales009 at autodragons dot com
Range of Products:
Car laser light, HID xenon kit, Automotive LED bulb, LED strip, For BMW LED angel eyes, CCFL angel eyes, LED license plate lamp, LED HID work lamp, LED light bar, LED daytime running light, Parking sensor, Plasma halogen lamp, LED spot light, Chrome bulbs, etc
Difference Between Single Beam, Hi/Low and Bi-Xenon HID
Single Beam HID (aka -1 Type)
Replace Bulb Type: H1/H3/H3C/H4-1(HB2)/H7/H8/H9/H10/H11/ 9004-1/9005(HB3)/9006(HB4)/ 9007-1/880/881/893/D2C/R/S, etc.
Most cars use the standard single bulb design. If you car use one bulb to give High beam and another bulb to give Low beam, that means you current bulb is Single beam model.
The bulb should be one of these types: H1/H3/H4-1(HB2)/H7/H11/9004-1/9005(HB3)/9006(HB4)/9007-1/880/881/893/D2C/R/S.
You should buy the HID KIT accordding to your current bulb types. They can be installed in your Low, High, Fog, or any housing that will accept this bulb type.
While, single beam hid kit, one hid kit can give you only High Or Low, if you want both, you have to buy 2 sets.
Bi-Xenon HID (aka -3 Type)
Replace Bulb Type: H4-3/9004-3/9007-3/H13-3
If you car use one bulb to give both High and Low beams, that means your current bulb have two filaments, or we called it Dual Beam Bulb
If you need your high beam to work properly, then you should buy a Bi-Xenon HID(our model bulb-3) which gives you both High and Low in Xenon.
This high beam will work correctly and will point where you tell it to. Bi-Xenon bulbs usually come with 3 wires per bulb. They also come with a control unit that handles the low vs high beam.Bi-Xenon bulbs can move, so you can have one bulb to give you High and Low.
The bulb is actually blocked so that the beam is directed down while in low-mode. When the car's electronics are engaged and the high beam is selected a magnet moves the bulb so that it is no longer blocked and you get "high" beam.
The BiXenon bulbs are only available in: H4, H13, 9004 and 9007 bulb types.
High/low HID (aka -2 Type)
Replace Bulb Type: H4-2/9004-2/9007-2/H13-2
However, if your car uses a 9004, 9007, H4 or H13 bulb, then you have another choices: It is to use a High/Low Bulb (our model bulb-2). The bulbs comes with one primary Xenon bulb and one Halogen bulb. The Halogen bulb is used for your high beam only and is only used where the state requires a high beam to pass inspection. Nothing more.
Note: the High portion of the High/Low bulb is NOT used for high beam driving as it will never point straight ahead. Its just for passing inspection.
These bulbs come with 3-4 wires, 2 for each bulb. it maybe necessary to splice the Halogen wires so that you get power to the high beam. High/Low bulbs come in H4, H13, 9004, 9007. They are just not produced in any other bulb type.